NDAA Compliant components for FPV quadcopters

• STM32F405 processor
• Betaflight, iNav, Ardupilot and PX4 support
• Two camera inputs, switchable under R/C Control
• Single sided layout (30x30mm hole centers)
• Locking JST-GH connectors
• USB-C connector
• Three IMU options (Including MPU-6000, and BMI270)
• Standard OSD
• Twin 2A switching regulators (5V and 10V)
• 16MByte serial flash memory
• 4 or 8 Motor Outputs
• SIK radio interface
• Payload connector, with GHST passthrough, UART, and GPIOs
• GPS/Magnetometer connector
• Onboard barometric altimeter
• Onboard beeper

NDAA compliant, designed and manufactured in the EU

• Brushless 4-in-1 ESC
• 70A Continuous (per motor), 80A for 10s
• 3s-6s Battery Support
• BL-Heli32 Pre-installed
• DShot 300/600/1200, Including Bi-directional modes
• 30 x 30mm Mounting Holes
• Weight:~28g
• Two cables included, one for direct connection to the Orqa F405 30X30 FC
• 4x Shock-absorbing Silicone Gummies

NDAA compliant, designed and manufactured in the EU

• Single multipole Lemo connector (analog + hdmi)
• Optional integrated 5.8GHz rapidFIRE receiver
• Simplified menu navigation, reduced switch count
• Rugged waterproof construction (IP53)
• 37° diagonal FOV
• 1280 x 960 pixels
• 4:3 native, or 16:9 (720p)
• 6-25V DC (2S – 6S Li Ion batery)
• 2.8W power consumption (typical)
• HDMI In, Composite video In, Power, Audio Out, Mic in
• 56-74mm IPD range
• -4D -> +4D focus adjust
• Integrated 1280 x 960, 50/60fps, H.264, mp4, DVR, with upscaling
• 256g weight
• 177 x 107 x 72mm

NDAA compliant, designed and manufactured in the EU